Zyxel-communications ZYWALL 100 User Manual download pdf

ZyWALL 100 Read Me First

Rear Panel Connections

PORT CONNECTION

CONSOLE Connect to your computer’s com port using a console cable.

WAN 10/100M Connect to a cable/xDSL device using an Ethernet cable.

DIAL BACKUP Connect to an analog or ISDN device using a console (RS-232)

cable.

POWER Connect the power cord to the ZyWALL and plug it into an

appropriate power outlet.

TO A COMPUTER TO A HUB

DMZ Crossover Ethernet cable Straight-through Ethernet cable

LAN 10/100M - UPLINK button “on” (pushed in)

Straight-through Ethernet cable Crossover Ethernet cable

LAN 10/100M - UPLINK button “off” (out)

Crossover Ethernet cable Straight-through Ethernet cable

WIRELESS LAN Use a ZyXEL Wireless PC Card to connect to a wireless LAN.

1 2 3 4 5

ZyWALL 100 Read Me First Rear Panel Connections Rear Panel Connections PORT CONNECTION CONSOLE Connect to your computer’s com port using a console

Before You Start Before You Start ZYWALL FACTORY DEFAULTS IP Address: 192.168.1.1 Subnet Mask: 255.255.255.0 Password: 1234 DHCP IP Pool: 192.168.1.

Page 3

1. Click Start and then Run. In the Run window, type "winipcfg" and then click OK to open the IP Configuration window. 2. Select your net

• Telnet • Console port using terminal emulation software Procedure For Web Configurator Configuration 1. Launch your web browser and enter “192

Page 5

Client IP field, your computer’s IP address must match it. For access from the LAN, check your computer’s TCP/IP configuration. The IP address and t

No comments

Zyxel-communications ZYWALL 100 User Manual