ZyXEL Communications P-334WT Technical Information Page 127

  • Download
  • Add to my manuals
  • Print
  • Page
    / 295
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 126
case, we intent to set to 'ffffffffffff' to mask the incoming source MAC address, [00 80 c8 4c ea
63].
Value (in hexadecimal)
Specify the MAC address [00 80 c8 4c ea 63] that the P-334WT should use to compare with the
masked packet. If the result from the masked packet matches the 'Value', then the packet is
considered matched.
Action Matched=
Enter the action you want if the masked packet matches the 'Value'. In this case, we will drop it.
Action Not Matched=
Enter the action you want if the masked packet does not match the 'Value'. In this case, we will
forward it. If you want to configure more rules please select 'Check Next Rule' to start
configuring the next new rule. However, please note that the 'Filter Type' must be also 'Generic
Filter Rule' but not others. Because the Generic and TCPIP (IPX) filter rules must be in different
filter sets.
Menu 21.1.2 - Generic Filter Rule
Filter #: 1,2
Filter Type= Generic Filter Rule
Active= Yes
Offset= 6
Length= 6
Mask= ffffffffffff
Value= 0080c810234a
More= No Log= None
Action Matched= Drop
Action Not Matched= Forward
You can now apply it to the 'General Ethernet Setup' in Menu 3.1. Please note that the 'Generic
Filter' can only be applied to the 'Device Filter' but not the 'Protocol Filter' that is used for
configuring the TCPIP and IPX filters.
Page view 126
1 2 ... 122 123 124 125 126 127 128 129 130 131 132 ... 294 295

Comments to this Manuals

No comments