ZyXEL Communications GS3700 Series User's Guide Page 29

  • Download
  • Add to my manuals
  • Print
  • Page
    / 416
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 28
Chapter 2 Hardware Installation and Connection
GS3700/XGS3700 Series User’s Guide
29
7 Slide the rear bracket along the rail and set the bracket in place depending on the depth of the rack.
The rear brackets can be used with a 19-inch rack.
You may now mount the Switch on a rack. Proceed to the next section.
2.5 Mounting the Switch on a Rack
Use the M6 rack screws (larger than the M4 screws) to mount the Switch with brackets on the rack.
1 Position a front mounting bracket (that is already attached to the Switch) on one side of the rack,
lining up the two screw holes on the bracket with the screw holes at the front of the rack.
2 Use a screwdriver to install the rack screws through the mounting bracket holes into the rack.
3 Repeat steps 1 and 2 to attach the other front mounting bracket on the other side of the rack.
4 Position a rear mounting bracket (that is already attached to the Switch) on one side of the rack,
lining up the two screw holes on the bracket with the screw holes at the rear of the rack.
5 Use a screwdriver to install the rack screws through the mounting bracket holes into the rack.
Front Bracket
Sliding Rail
Rear Bracket
Page view 28
1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 415 416

Comments to this Manuals

No comments