ZyXEL Communications ZyAIR G-160 User's Guide Page 394

  • Download
  • Add to my manuals
  • Print
  • Page
    / 430
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 393
ZyAIR G-2000 Plus User’s Guide
393 Appendix D
Figure 231 IP Address Conflicts: Case B
To solve this problem, make sure the ZyAIR LAN IP address is not in the DHCP IP address
pool.
Case C: The Subscriber IP address is the same as the IP
address of a network device
The following figure depicts an example where the subscriber IP address is the same as the IP
address of a network device not attached to the ZyAIR.
Figure 232 IP Address Conflicts: Case C
You must set the ZyAIR to use different LAN and WAN IP addresses on different subnets if
you enable DHCP server on the ZyAIR. For example, you set the WAN IP address to
192.59.1.1 and the LAN IP address to 10.59.1.1. Otherwise, It is recommended the ZyAIR use
a public WAN IP address.
Case D: Two or more subscribers have the same IP address.
By converting all private IP addresses to the WAN IP address, the ZyAIR allows subscribers
with different network configurations to access the Internet. However, there are situations
where two or more subscribers are using the same private IP address. This may happen when a
subscriber is configured to use a static (or fixed) IP address that is the same as the IP address
the ZyAIR DHCP server assigns to another subscriber acting as a DHCP client.
Page view 393
1 2 ... 389 390 391 392 393 394 395 396 397 398 399 ... 429 430

Comments to this Manuals

No comments