ZyXEL Communications P-660H - VERSION 3.40 User Manual download pdf (Page 9)

ZyXEL Confidential

Problem Condition: step1. Reset default romfile. step2. Login GUI-> Advanced-> Remote MGMT-

>SNMP, change the port from 161 to 16101, and then click “Apply”. step3. Run MIB Browser, use port

16101 you can’t login in. but if you use the port 161 login first then change the port to 16101, it can

work correctly.

4. [BUG FIXED] SPRID: 060324080

Problem Symptom: [Regression]Set TR069, it can’t work if you don’t reboot it.

Problem Condition: Set TR069, it can’t work if you don’t reboot it.

5. [BUG FIXED] SPRID: 060327142

Problem Symptom: active Windows Networking(NetBIOS over TCP/IP) in GUI/ advanced/ LAN/ IP

Page, it can’t save

Problem Condition: step1. login advanced, in network->LAN->IP page, click “advanced setup” button,

in the following page, active Windows Networking(NetBIOS over TCP/IP), allow between LAN to

WAN, then click “apply”. step2. go to the page again, the set can’ t save, the Windows

Networking(NetBIOS over TCP/IP) is still inactive.

Modifications in V 3.40(AGD.1)b3 | 02/23/2006

1.[BUG FIXED]SPRID: 060208201

Symptom: In GUI NAT ”many to many no overload” ,set IGA and ILA range does not match,but can

save.And can’t show erro message

Condition: step1:In GUI,NAT-- ＞ Full feature,edit ” many to many no overload ” rule.Local

IP:start=192.168.1.33,end=192.168.1.39.Global IP:start=17.2.5.12,end=17.2.5.14.But it can save and can’

t show erro message. 3.40(AGD.1)b1 can show a erro message. Step2:In SMT it will show a correct erro

message ”IGA and ILA range does not match”

2 .[BUG FIXED]SPRID: 060209315

Symptom: run FTP file download about 8 hours,the device will reboot.

Condition: run FTP file download about 8 hours,the device will reboot. use Acaltel UD adsl2+,sync up

rate:up 1195kbps,down 22037kbps.file download rate:2105kB/s

3 .[BUG FIXED]SPRID: 060208192

Symptom: Set NAT rule, the DUT will crash.set 10 rules in menu 15.1.1, then set rules one by one in menu

15.1.2, when you set the 9th rule, DUT will crash.

Condition: Set NAT rule, the DUT will crash.set 10 rules in menu 15.1.1, then set rules one by one in menu

15.1.2, when you set the 9th rule, DUT will crash.

4 .[BUG FIXED] SPRID: 060223108

Problem Symptom: set a filter, when apply it use CI command in WAN, it must fill 4 parameter,

but apply it in LAN it need not to fill 4 parameter, it can be save when it have only 1

parameter.

Problem Condition: set a filter, when apply it use CI command in WAN, it must fill 4 parameter,

but apply it in LAN it need not to fill 4 parameter, it can be save when it have only 1

parameter.

5. [BUG FIXED] SPRID: 060223109

Symptom:when do chamber test DSL will link down an then up in one sencond .

Condition:when do chamber test DSL will link down an then up in one sencond .

6. [BUG FIXED] SPRID: 060223110

Symptom:In GUI->Wizard Setup->Media Bandwidth Mgnt., click “next”,when it goes to next page, click

“Return to Main Menu” to go to site map. Then click “back” button of IE, it cannot turn to previous page.

Condition:In GUI->Wizard Setup->Media Bandwidth Mgnt., click “next”,when it goes to next page, click

“Return to Main Menu” to go to site map. Then click “back” button of IE, it cannot turn to previous page.

7. [BUG FIXED] SPRID: 060223111

Symptom: Prestige can not be managed from WAN side in RFC1483bridge mode.

Condition: Prestige can not be managed from WAN side in RFC1483bridge mode.

8. [BUG FIXED] SPRID: 060223126

Problem Symptom: The RIP via IP alias 1 and IP alias 2 can not works correctly.

Problem Condition: Step1.in GUI, config the IP alias 1 and IP alias 2, set the RIP direction = Both or In

only, the RIP Version = RIP-1, RIP-2B or RIP-2M.

Step2.in LAN PC use tool generate RIP packet, the DUT can’t receive the RIP packet.

Step3.use CI commands setup, have the same issue.

9.change datapump to 5.1.3.0

Page 9 of 12

1 2 3 4 5 6 7 8 9 10 11 12

Comments to this Manuals

No comments

ZyXEL Communications P-660H - VERSION 3.40 User Manual Page 9

Comments to this Manuals

Related products and manuals for Networking ZyXEL Communications P-660H - VERSION 3.40