ZyXEL Communications PLA-4xx User's Guide download pdf (Page 27)

Chapter 3 Managing Your PLA-400/402

PLA-400/402 Series User’s Guide

Figure 15 Firmware Screen

The following table describes the labels in this screen.

Table 3 Firmware Screen

LABEL DESCRIPTION

Adapter This field identifies which PLA-400/402 is displayed. The power line adapter is

identified by the Ethernet interface (network card) connected directly to the PLA-400/

402. The displayed information is the model name of the network card. Typically there

is only one connection, however, if your computer has two network cards and both

are connected to a PLA-400/402, then you have two power line networks.

Firmware

Upgrade

These fields are used when you want to upgrade the firmware or the PIB (Parameter

Information Block) file on the local device. The local device is the PLA-400/402

directly connected to the computer running the configuration utility.

Open PIB File Parameter Information Block (PIB) contains information which tells the PLA-400/402

how to perform basic operating instructions.

Click Browse to locate the PIB file you want to upload to the PLA-400/402.

Firmware

Location

Click Browse to find the firmware file you want to upload to the PLA-400/402.

Note: Remember that you must decompress compressed (.zip)

files before you can upload them.

Write Click this to save the new PIB and firmware files to the PLA-400/402 that is directly

connected to the computer running the configuration utility. If the firmware/PIB file

upgrade is successful, a confirmation window displays “Commit Successful”.

Note: If you receive an error message make sure that your paths

point to the correct files before you click the Write button.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 47 48

No comments

ZyXEL Communications PLA-4xx User's Guide Page 27