Zyxel-communications PRESTIGE 128MH User Manual download pdf (Page 96)

Prestige 128MH PSTN Router/Hub

5-4 Remote Node TCP/IP Configuration

The following table shows the TCP/IP related fields in Menu 11.3 - Remote Node Network Layer

Options.

Table 5-2. TCP/IP Remote Node Configuration

Rem IP Address This will show the IP address you entered for this remote node

in the previous menu.

Rem IP Subnet

Mask

Enter the subnet mask for the remote network.

My WAN Addr Some implementations, especially the UNIX derivatives,

require the WAN link to have a separate IP network number

from the LAN and each end must have a unique address within

the WAN network number. If this is the case, enter the IP

address assigned to the WAN port of your Prestige.

Note that this is the address assigned to your local Prestige,

not the remote router.

(See Figure 5-3 for an explanation of My WAN Addr. With

Sample IP Addresses)

Single User

Account

Set this field to [Yes] to enable the Single User Account feature

for your Prestige. Use the space bar to toggle between [Yes]

and [No]. See Chapter 3 - Internet Access Application for more

information on the Single User Account feature.

[Yes/No]

Server IP address If you enable Single User Account and you want to make a

server on your LAN accessible to the outside world, enter that

server’s inside IP address here.

1 2 ... 91 92 93 94 95 96 97 98 99 100 101 ... 184 185

No comments

Zyxel-communications PRESTIGE 128MH User Manual Page 96