ZyXEL Communications P-324 User's Guide download pdf (Page 143)

100

101

P-2602HWNLI User’s Guide

Chapter 9 Wireless LAN 143

Figure 71 OTIST

The following table describes the labels in this screen.

9.5.1.2 Wireless Client

Start the ZyXEL utility and click the Adapter tab. Select the OTIST check box, enter the

same Setup Key as your AP and click Save.

Table 44 OTIST

LABEL DESCRIPTION

Setup Key Type an OTIST Setup Key of exactly eight ASCII characters in length.

The default OTIST setup key is "01234567".

Note: If you change the OTIST setup key here, you must also

make the same change on the wireless client(s).

Yes! If you want OTIST to automatically generate a WPA-PSK, you must:

Change your security to any security other than WPA-PSK in the Wireless

LAN > General screen.

Select the Yes! checkbox in the OTIST screen and click Start.

The wireless screen displays an auto generated WPA-PSK and is now in WPA-

PSK security mode.

The WPA-PSK security settings are assigned to the wireless client when you

start OTIST.

Note: If you already have a WPA-PSK configured in the

Wireless LAN > General screen, and you run OTIST with

Yes! selected, OTIST will use the existing WPA-PSK.

Start Click Start to encrypt the wireless security data using the setup key and have

the ZyXEL Device set the wireless client to use the same wireless settings as

the ZyXEL Device. You must also activate and start OTIST on the wireless

client at the same time.

The process takes three minutes to complete.

1 2 ... 138 139 140 141 142 143 144 145 146 147 148 ... 441 442

Comments to this Manuals

No comments

ZyXEL Communications P-324 User's Guide Page 143

Comments to this Manuals

Related products and manuals for Routers ZyXEL Communications P-324