ZyXEL Communications P-660R-Tx v2 Series User's Guide download pdf (Page 46)

P-660R-Tx v2 Series User’s Guide

Chapter 3 Wizard Setup 47

The following table describes the labels in this screen.

3.2.5 DHCP Setup

DHCP (Dynamic Host Configuration Protocol, RFC 2131 and RFC 2132) allows individual

clients to obtain TCP/IP configuration at start-up from a server. You can configure the ZyXEL

Device as a DHCP server or disable it. When configured as a server, the ZyXEL Device

provides the TCP/IP configuration for the clients. If you turn DHCP service off, you must

have another DHCP server on your LAN, or else the computer must be manually configured.

3.2.5.1 IP Pool Setup

The ZyXEL Device is pre-configured with a pool of IP addresses for the DHCP clients (DHCP

Pool). See the product specifications in the appendices. Do not assign static IP addresses from

the DHCP pool to your LAN computers.

3.2.6 Internet Access Wizard Setup: Third Screen

Verify the settings in the screen shown next. To change the LAN information on the ZyXEL

Device, click Change LAN Configurations. Otherwise click Save Settings to save the

configuration and skip to the section 3.13.

Table 8 Internet Connection with PPPoA

LABEL DESCRIPTION

User Name Enter the login name that your ISP gives you.

Password Enter the password associated with the user name above.

IP Address This option is available if you select Routing in the Mode field.

A static IP address is a fixed IP that your ISP gives you. A dynamic IP address is not

fixed; the ISP assigns you a different one each time you connect to the Internet.

Click Obtain an IP Address Automatically if you have a dynamic IP address;

otherwise click Static IP Address and type your ISP assigned IP address in the IP

Address text box below.

Connection Select Connect on Demand when you don't want the connection up all the time and

specify an idle time-out (in seconds) in the Max. Idle Timeout field. The default setting

selects Connection on Demand with 0 as the idle time-out, which means the Internet

session will not timeout.

Select Nailed-Up Connection when you want your connection up all the time. The

ZyXEL Device will try to bring up the connection automatically if it is disconnected.

Network

Address

Translation

This option is available if you select Routing in the Mode field.

Select None, SUA Only or Full Feature from the drop-sown list box. Refer to Chapter

7 on page 71 for more details.

Back Click Back to go back to the first wizard screen.

Next Click Next to continue to the next wizard screen.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 174 175

No comments

ZyXEL Communications P-660R-Tx v2 Series User's Guide Page 46